I. Brief introduction Item Index Item Index Outlook Milkwhite ropy liquid Solidity (wt%) 50±2 Vitrification point (Tg) 16 -25℃ Viscosity (mpa.s) 5000 - 15000 Ph Value 5.5 – 7.0 Mechanical stability Pass 3500 r/min for 30 minutes Chemical stability (5% calcium chloride) 1:5, no flocculation and other deformation III. Package and storage
This product is the anion latex made by the vinyl acetate and the acrylic ester via the diversified copolymerization. The most obvious features of this product is the good effect of canning, full paint film, good leveling property and extreme good dilution stability. The largest shortcoming is the poor water resisting property and weak antiyellowing. It can be only applied in the mediate and low-degree emulsion varnish for the internal wall. We don’t suggest that you use it for the external wall. You can add it in the cementing compound to increase its cohesional strength and tenacity.
II. Technical indexes
The package is the plastic barrel of 50 kg, iron barrel with 200kg with the plastic inside lining or customized on the request of the customers.
The product should be stored in the room with the temperature of 5 - 35℃. The direct sunlight and the explosion in the air for long time should be avoided, or the water will be vaporized and there will be skinning. The time length for storage is normally half year.
IV. Security
This product is not toxic, corrosive, flammable, it belongs to the non-dangerous goods

